A non contact clamp on flow meter that calculates flow velocity without the need to cut into existing pipework
An ultrasonic clamp on flow meter, the Orakel Time of Flight flow meter is a non invasive liquid flow measurement tool. It is used for monitoring flows in closed pipes and can be easily installed without stopping the process. It uses ultrasonic technology to calculate flow velocity without the need to cut into existing pipework. Transducers are simply clamped onto the exterior wall of the pipe. This makes it ideal for measuring liquids in industrial process applications.
The ORAKEL ultrasonic clamp on flow meter works by sending an ultrasonic signal from one transducer to the next and measuring the time it takes for that signal to be received. This is known as Transit Time. Signals are sent through the pipe in both an upstream and downstream direction.
If there was no flow in the pipe, the transit time would be the same in either direction. However, when there is a flow, sound moves faster when travelling in the same direction as the flow and slower when moving against the flow. When the fluid moves faster, the difference between the upstream and downstream times increases. The difference in time between upstream measurement and the downstream measurement is used to calculate the flow.
Transit time ultrasonic flow meters can be configured in a Z, V and W pattern. The best configuration depends on factors such as pipe size, the condition of the pipe, or the characteristics of the liquid inside the pipe. The most common configuration is the V shape where two transducers are positioned on the same side of the pipe. When positioning the transducers, measure the pipe diameter and put the same distance between the transducers.
|LINING:||None, Cement, Epoxy, Glass, PP, PVDF, Rubber, Other|
|PIPE:||Carbon Steel, Stainless Steel, Cast Iron, Ductile Iron, Copper, PVC, Aluminium, Asbestos, Fibre Glass – Epoxy, Other|
|FLUID:||Water, Sea Water, Kerosene, Gasolene, Fuel Oil, Crude Oil, Freon R134a, Freon R22, Diesel Oil, Castor Oil, Peanut Oil, Ethylene glycol, Glycol/Water 50%, Alcohol, Other|
It is suitable for the following applications:
The ORAKEL Time of Flight flow meter is a cost effective alternative to traditional in-line meter installation.
Industries that will benefit from clamp on flow montioring include:
Power Plants – Monitoring cooling water, pump protection, condensate and boiler feedwater
Water Companies – water treatment inflow, treatment plant outflow, drinking water networks, verification of water meters, pump protection, leak detection
Facility Management – hot and cold water systems, cooling systems and air conditioning systems, pump control.
Chemical and pharmaceutical industry – aggressive and toxic media, oil, raw and wastewater.
Food and Beverage industry – hygenic measurement of liquids
We are specialists in the design, manufacture and installation of ultrasonic wastewater flow and level monitoring equipment for the water industry. At Detectronic, we provide a range of wastewater management services to help you. Any of our products and services can be combined to create a package that’s tailored to your business and your end goals.