Capable of measuring a range of water characteristics, the control unit connects up to 2 sensors as standard but is expandable up to 16 sensors
The ORAKEL System is the ultimate water flow and water quality measuring product range. Created as a modular system, a wide range of sensors can be added to measure various water characteristics, for a truly bespoke and cost-effective solution.
Capable of measuring a range of water characteristics, the control unit connects up to 2 sensors as standard but is expandable up to 16 sensors.
Optional comms packages allow Profibus, Modbus ASCII, Modbus RTU, Modbus TCP, 4-20mA analogue outputs and relays for alarms and control.
Equipped with a display screen, readings can be taken directly from the control unit or downloaded from the internal data logger. An optional Detectronic modem allows for remote communication capabilities.
Full PID control suitable for nearly all dosing requirements, from simple to very complex processes.
Includes a full set of instrument and measurement diagnostics.
An integrated signal oscilloscope optimises sensor positioning and diagnostics.
Includes a comprehensive internal database of pipe, fluid and lining materials.
Built-in fluid parameters allow calculation to compensate for sound speed, density, viscosity, specific heat capacity and temperature (if temperature is known from optional temperature probe).
Liquid can be measured in M, m3, USgal, mg, cf, bbl and Imp bbl. All measured values can be selected as flow rate per second, minute, hour or day and are automatically totalised.
An optional GSM data-logger can be added and date sent to an online portal for detailed analysis.
The ORAKEL System is suitable for use in closed, partially filled and open channels.
The wide variety of sensors that can be added make it suitable for many applications, including:
✔ Municipal and industrial wastewater
✔ Chemical process
✔ Food and dairy
✔ Paper and pulp
✔ Other process industries.
The ORAKEL controller can be connected to up to 16 sensors for an application. The following flow and quality sensors are available:
2 configurable sensor inputs; 4-20mA loop powered, 0-2 VDC, +/- 1200 mV for pH, ORP, or ISEs, PT100, pulse and Modbus. Unused inputs can be used as Outputs. Up to 8 digital inputs.
230 x 309 x 103mm.
2 user configurable alarms with deadband and delay for each parameter and control output.
2 user configurable thresholds (for control) with deadband and delay for each measurement and control output.
Configurable flow proportional PID – multiple loops.
Modbus ASCII/RTU (RS485).
Modbus TCP (Ethernet) 2G/3G modem.
Internal – single parameter data log or status message log over 1 million records (downloadable data logs optional).
2 configurable analogue outputs; 0-20mA, 4-20mA, 0-1 VDC, 0-10 VDC, 1-10 VDC.
Up to 8 SPST electromechanical relays rated 380 VAC, 6A maximum (relays are rated 6A for resistive loads and 2A for inductive loads).
Any non-pictogram by request.
Any Latin, Cyrillic, Hellenic.
All user configuration is stored in non-volatile on-board flash memory.
ABS flame retardant IP65N, Nema 4X.
4.3″, 480 x 272, 8 bit, greyscale
(4.3″, 480 x 272, full colour optional).
12 months from date of purchase.
We are specialists in the design, manufacture and installation of ultrasonic wastewater flow and level monitoring equipment for the water industry. At Detectronic, we provide a range of wastewater management services to help you. Any of our products and services can be combined to create a package that’s tailored to your business and your end goals.